LDX-020B Fully automatic swing angle circular saw blade grinding
machine manufacturer
Saw blade grinding the best method:
1,Machine grinding. A professional saw blade sander is required.
Install the saw blade on the machine
2,Adjust the grinding Angle and speed. Start the machine and start
grinding, making sure the serrations grind evenly.
3,Use a finer grinding wheel for polishing, so that the surface of
the saw blade is smooth, and finally wipe it clean with a rag.
What angle should the saw blade be sharpened? Selection of saw
tooth angle:
1,The angle parameters of the sawtooth part are relatively complex
and the most professional, and the correct selection of the angle
parameters of the saw blade is the key to determining the quality
of sawing. The most important angle parameters are rake angle, back
angle and wedge angle.
2,The rake angle mainly affects the force consumed in sawing wood
chips. The larger the rake angle, the better the cutting sharpness
of the saw teeth, the lighter the sawing, and the easier it is to
push the material. Generally, when the material to be processed is
soft, choose a larger rake angle, otherwise choose a smaller rake
angle.
| Technical Parameters: |
| Processing saw blade diameter range: ¢100-800mm |
| Saw blade aperture: ¢10-220mm |
| Saw blade thickness (steel plate): 1-7mm |
| Pitch: 7-100mm |
| Tooth surface angle: 5 degrees ~ +30 degrees |
| Tip back angle: 6-45 degrees |
| Left and right inclination of the tooth: tooth top / tooth surface
45 degrees |
| Sharpening stroke range: up to 25mm (adjustable) teeth / minute |
| Sharpening speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth / minute |
| Grinding wheel size (outer diameter x hole): (¢125mmx¢32mmX1mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head can rotate angle: 90 degrees and 180 degrees |
| Grinding wheel line speed: 26m / s |
| Coolant pump flow: 501/min |
| Cooling tank volume: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 710KG |
| Mechanical size (length X width X height): 1500X1300X1800mm |
|
| Technical features: |
| This machine is designed in reference to the features of domestic
and foreign similar types, which absorbs and analyzes the
advantages of the same type and improves the functions to some
extent at the same time. |
|
| 1. Preset many groups of tooth types and one-key multifunctional
operation. |
2. Trapezoid flat teeth can be finished at a time, features CNC
grinding and arbitrary tooth types, and can improve the efficiency
by 3 times; due to the adoption of improved tooth extraction
operation, the accuracy is improved, and the service life is
prolonged.
|
