LDX-026A Servo Feed Full CNC Circular Saw Blade Front And Rear
Angle Grinder Factory Direct Sales
How to repair the metal saw blade:
1,The energy consumption of machine tools using saw blades
increases significantly.
2,When sawing the material, there is obvious blasting phenomenon
and rough section.
3,The cutting edge wear of the alloy cutter head reaches 0.02MM.
Saw blade grinding machine The use of sawtooth grinding machine:
1,Adjust the position of the center axis by observing the size of
the grinding disc. If a large saw blade needs to be polished,
gently rotate the center shaft to the side close to the grinding
blade; If sharpening a small saw blade, it needs to be adjusted
away from the sharpening blade.
2,Push the center shaft to the right end to provide sufficient
clearance for subsequent blade installation.
3,Next, the saw blade is installed, and then by rotating the hand
wheel, the initial position of the grinding surface of the saw is
positioned to ensure that the contact Angle with the grinding wheel
is accurate.
4,Then, it is critical to adjust the grinding Angle. By rotating
the table, the Angle of the sawtooth grinding surface is carefully
adjusted to form an ideal intersection Angle with the working face
of the grinding wheel, which will directly affect the quality and
efficiency of grinding.
5,Finally, make sure that the feed Angle of the grinding surface is
also adjusted to the best, which usually means that the grinding
surface is relative to the feed direction of the grinding wheel,
and a proper Angle can ensure uniform wear and cutting effect of
the teeth.
| Main Technical Parameters : |
| Range of external diameter of processing:￠100-￠800mm |
| Inner bore of saw blade:￠10-220mm |
| Thickness of saw web (steel plate):1-8mm |
| Pitch range:7-100mm |
| Tooth face angle:5°~+30° |
| Tooth top dorsal angle:6-45° |
| Tooth left/right gradient: Tooth top/tooth face 45° |
| Cutter grinding stroke range: Max. 25mm (adjustable) teeth/min |
| Grinding speed:0.5-6mm/s |
| Working speed: Max. 20 teeth/min |
| Grinding wheel dimensions (outer diameter * bore):
(￠125mm*￠32mmX1mm) |
| Negative chamfer grinding: -27° |
| Grinding head rotation angle: 90° and 180° |
| Grinding speed: 26m/s |
| Coolant pump flux:501/min |
| Coolant cylinder volume: 85L |
| Total power: 2.2KW |
| Voltage:three-phase 380v |
| Total weight of equipment:900KG |
| Appearance(Long*Width*Height):1500X1300X1800mm |
| Technical features: |
| This machine is designed in reference to the features of domestic
and foreign similar types, which absorbs and analyzes the
advantages of the same type and improves the functions to some
extent at the same time. |
| 1. Preset many groups of tooth types and one-key multifunctional
operation. |
| 2. Trapezoid flat teeth can be finished at a time, features CNC
grinding and arbitrary tooth types, and can improve the efficiency
by 3 times; due to the adoption of improved tooth extraction
operation, the accuracy is improved, and |
