LDX- Factory Direct Sales Simple Automatic Alloy Saw Blade Grinding
Machine
The correct grinding method of woodworking band saw blade:
1,Before woodworking band saw blade cutting operation, the
automatic cutting machine should be debugged first, and then the
cutting.
2,The punch and die of the gear cutting machine must be sharp, and
the bite should be consistent, the gap is less than 0.1 mm, if the
punch is not sharp, the serrate is prone to cracks and deformation.
Especially thin saw blades are prone to distortion. Such a punch
should be immediately trimmed, if such a punch teeth, apply a
hammer to smooth the serrate, to prevent sawing when running.
3,When the saw blade of woodworking band saw machine is opened, the
saw blade must be in a horizontal state, and its surface should be
perpendicular to the stamping direction of the punch of the cutting
machine, and should not be tilted. At the same time, the edge of
the saw blade should be parallel to the guide rail, and the pitch
of the teeth after opening the teeth. The tooth height should be
uniform.
| Technical parameter: |
| Processing saw blade thickness: 0.6-3mm |
| Saw blade width: 27-100mm |
| Working speed: Maximum 18 teeth/min |
| Grinding wheel size (outer diameter X hole) : ￠125mmX32mm |
| Grinding wheel line speed: 26m/s |
| Coolant pump flow rate: 501 |
| Coolant cylinder volume: 80L |
| Total power: 2KW |
| Voltage: three-phase 380V |
| Mechanical weight: 200KG |
| Mechanical dimensions (L X W X H mm) : 800X800X1080 |
|
| Grinding object: |
| Alloy band saw blade, bimetal band saw blade, frame saw blade,
width 27mm-150mm can be used. Can grind all kinds of tooth shape,
such as 3-4 teeth, 4/6 teeth, variable teeth and equal teeth, etc.
The machine is simple and convenient to operate, suitable for
large, medium and small machinery factory, wood processing, steel
sawing processing plant, alloy band saw blade, bimetal band saw
blade, frame saw blade tooth shape grinding indispensable
equipment. |
