LDX-028AHigh precision servo full CNC circular saw blade double
grinding head side Angle grinding machine
How much do you know about the operation specification of automatic
saw blade grinding machine?
1,When the equipment is shut down for more than eight hours, it
should first start the hydraulic lubrication of the machine tool
for 5-10 minutes, and then run the motion shaft manually to check
whether the operation of each part is normal; Confirm normal
operation, good lubrication, no alarm, can start work.
2,Do not open the electric control cabinet without permission.
3,The operator must be familiar with the structural performance,
transmission principle and processing application program of the
equipment, and can operate independently after passing the
examination and obtaining the operation certificate.
4,The operator should seriously do "three good" (management, good
use, repair) "four will" (will use, will maintain, will check, will
troubleshoot).
5,The operator must comply with the provisions of the "five
disciplines" for using the equipment and the "four requirements"
for maintaining the equipment.
6,The operator should inspect the equipment at any time in
accordance with the requirements of the "itinerant inspection
content".
| Technical parameters: |
| Saw web machining diameter range:￠100-￠800mm |
| Saw web bore diameter: 12-220mm |
| Thickness of saw web (steel plate):1-7mm |
| Tooth pitch: 5-80mm |
| Front inclination angle, inclination angle: 5°-15° |
| Radial angle: 3°-15° |
| Operating speed: 18 teeth/min |
| Feeding stroke: 1-28mm (stepless variable speed) |
| Grinding wheel dimensions: 80*100*32mm |
| Grinding speed: 26m/s |
| Coolant pump flux: 501/min |
| Coolant cylinder volume: 90L |
| Total power: 4.3KW |
| Voltage: Three-phase 380v |
| Weight: 1,100KG |
| Outer diameter dimensions: 1.75*1.4*2.0mm |
| Technical characteristics: |
An intuitive and simple whole Chinese operation interface is
matched with a large-sized touch screen, so the equipment is easier
to operate, and all preset procedures or self-compiled procedures
are more convenient to call; the servo tool setting device features
accurate positioning, so the product grinding accuracy is greatly
ensured. Due to the adoption of high-quality and high-accuracy
castings and machined parts, the service life of the equipment is
greatly prolonged, and the equipment is simple and easy to operate
and maintain; one person can operate many pieces of equipment at
the same time, so the production efficiency is greatly improved,
and the cost is reduced.
|
