LDX-020B Automatic circular saw blade grinding machine
How to keep the alloy saw blade sharp:
1,TCT saw blades have strict requirements, different models
correspond to different equipment, can not be randomly matched to
it, such as: cutting metal saw blades, used to saw wood, this is a
very common mistake, some laypeople think that cutting metal can
be, cutting wood should be faster and sharper! If the saw blade
used in the metal circular saw machine is used to cut wood, the
result is stuck teeth, broken teeth, saw blade consumption is too
large, the cost is too high.
2,Carbide saw blade is a consumable, has its service life, many
companies in the cutting processing that if not to the service
period will not be replaced, directly so far can not be used!
Indeed, this is a thing that all enterprises do, think it is
normal, very reasonable, but this is a very lazy approach;
3,If the life of the saw blade is cutting 40 square meters, then it
should be replaced when cutting 20 square meters, so that after the
rest, you can at least cut 30 square meters, rest later generations
will be more energetic, and the product is the same!
4,The quality of metal circular saw equipment will also affect the
quality of the saw blade, the coordination and compatibility
between them is very important, and then the best saw blade if
placed on the quality of very poor equipment, its efficacy will be
reduced by at least half.
5,Equipment can not see beyond the scope of the material, which
will not only affect the performance and stability of the
equipment, the biggest damage is cemented carbide saw blade, the
same equipment should have its reasonable rest period, which can
also drive the saw blade breathing control time.
| Technical Parameters: |
| Processing saw blade diameter range: ¢100-800mm |
| Saw blade aperture: ¢10-220mm |
| Saw blade thickness (steel plate): 1-7mm |
| Pitch: 7-100mm |
| Tooth surface angle: 5 degrees ~ +30 degrees |
| Tip back angle: 6-45 degrees |
| Left and right inclination of the tooth: tooth top / tooth surface
45 degrees |
| Sharpening stroke range: up to 25mm (adjustable) teeth / minute |
| Sharpening speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth / minute |
| Grinding wheel size (outer diameter x hole): (¢125mmx¢32mmX1mm) |
| Negative chamfer grinding: -27 degrees |
| Grinding head can rotate angle: 90 degrees and 180 degrees |
| Grinding wheel line speed: 26m / s |
| Coolant pump flow: 501/min |
| Cooling tank volume: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 710KG |
| Mechanical size (length X width X height): 1500X1300X1800mm |
|
| Technical features: |
| This machine is designed in reference to the features of domestic
and foreign similar types, which absorbs and analyzes the
advantages of the same type and improves the functions to some
extent at the same time. |
|
| 1. Preset many groups of tooth types and one-key multifunctional
operation. |
2. Trapezoid flat teeth can be finished at a time, features CNC
grinding and arbitrary tooth types, and can improve the efficiency
by 3 times; due to the adoption of improved tooth extraction
operation, the accuracy is improved, and the service life is
prolonged.
|
