LDX-028A Factory Direct CNC Full Servo TCT Saw Blade Double
Grinding Head Side Grinding Machine
Started grinding of saw blade grinder:
1,Before starting, the distance between the grinding wheel and the
saw blade should be at least 10mm, and then start. Before adjusting
the push start, the distance between the grinding wheel and the saw
blade should be maintained at least 10mm, and then start the
machine, adjust the stroke adjustment rod of the push claw, so that
the impact point of the push claw is in an appropriate position
2,After the machine starts, if the high and low teeth are grinding,
adjust the difference between the high and low teeth adjustment
rod, indicating needle and scale display. After the machine starts,
if both the high and low teeth are grinding, adjust the adjustment
lever for the difference between the high and low teeth, and the
indicator needle and scale are displayed as zero.
3,Use the grinding wheel feed screw to move the grinding wheel head
towards the saw blade. Immediately contact the saw blade, adjust
the reverse gear adjusting screw, so that the saw blade tooth
concave to the grinding wheel (clockwise adjust the screw, the
teeth move forward, the rear teeth grind more, vice versa, the
cutting Angle grind more), and then move the grinding wheel head to
the saw blade.
| Technical parameters: |
| Saw web machining diameter range:￠100-￠800mm |
| Saw web bore diameter: 12-220mm |
| Thickness of saw web (steel plate):1-7mm |
| Tooth pitch: 5-80mm |
| Front inclination angle, inclination angle: 5°-15° |
| Radial angle: 3°-15° |
| Operating speed: 18 teeth/min |
| Feeding stroke: 1-28mm (stepless variable speed) |
| Grinding wheel dimensions: 80*100*32mm |
| Grinding speed: 26m/s |
| Coolant pump flux: 501/min |
| Coolant cylinder volume: 90L |
| Total power: 4.3KW |
| Voltage: Three-phase 380v |
| Weight: 1,100KG |
| Outer diameter dimensions: 1.75*1.4*2.0mm |
| Technical characteristics: |
An intuitive and simple whole Chinese operation interface is
matched with a large-sized touch screen, so the equipment is easier
to operate, and all preset procedures or self-compiled procedures
are more convenient to call; the servo tool setting device features
accurate positioning, so the product grinding accuracy is greatly
ensured. Due to the adoption of high-quality and high-accuracy
castings and machined parts, the service life of the equipment is
greatly prolonged, and the equipment is simple and easy to operate
and maintain; one person can operate many pieces of equipment at
the same time, so the production efficiency is greatly improved,
and the cost is reduced.
|
